October 1, 1979
COMMERCIAL ITEM DESCRIPTION
BAG, COTTON DUCK
The General Services Administration has authorized the use of this
Commercial Item Description in lieu of Federal Specification PPP-B-1358
This commercial item description covers cotton duck bags for trash cats and trash stands.
Salient characteristics:
The cloth used in the fabrication of the bags shall be natural hard texture unbleached cotton duck, weighing not less than 14 oz/yd2 and with a minimum break of 245 lb in the warp direction and 160 lb in the filling direction. Grommets and washers shall be rolled rim with spur washers, galvanized steel; inside diameter – 9/16 inch, outside diameter – 11/16 inch.
Workmanship. Seams shall be properly sewn to avoid run-offs, twists, pleats, or puckers. The breaks in all stitching shall be overstitched not less than 1 inch at the ends except where ends are turned under in a helm or held down by other stitching. Thread tension shall be maintained to avoid lose stitching.
Certification. The contractor shall certify that the product offered meets the salient characteristics of this commercial item description and that the product conforms to the producer’s own drawing, specifications, standards, and quality assurance practices and is the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Recovered materials. The manufacturer shall utilize recovered materials to the maximum extent practicable.
Packaging, packing and marking. The bags shall be packed in accordance with normal commercial practice. The complete pack shall be designed to protect the item against damage during multiple shipments, handling, and storage; to insure delivery at destination; to provide for redistribution by the initial receiving activity; and shall be acceptable by common carrier under National Motor Freight Classification and Uniform Freight Classification. Marking shall be as specified in the contract or order.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business