A-A-54429
29 July 1988
COMMERCIAL ITEM DESCRIPTION
BAG, PLASTIC
The General Services Administration has authorized the use of this Commercial Item Description.
This Commercial Item Description covers a heat or tape sealable plastic bag suitable for use as dust cover for sterilized medical supplies.
Salient Characteristics:
The plastic bag shall be a clear polyethylene cover suitable for protecting sterilized medical supplied from dust contamination when sealed by heat or tape. The plastic bag shall be supplied in the following sizes:
Size I – 12 inches wide by 20 inches long (30.5 cm by 50.8 cm)
Size II – 16 inches wide by 30 inches long (40.6 cm by 76. 2 cm)
Width and length specified for indicated bag size shall be minimum dimensions. Dimensional tolerances within each lot of material shall be plus or minus 1/4 inch for width and length. The polyethylene film used in the construction of the bag shall be 3 mils plus or minus 1/2 mil thick.
The plastic bag shall be sealed, or closed, on three ends. One sealed, or closed, end shall have a tear line suitable for rapid opening without use of a scissors, knife, or other instrument. A perforated tear line shall not be acceptable as this would compromise sterility. The open end of the plastic bag shall be readily sealable by use of heat or tape.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business