[METRIC]
A-A-1799B
November 7, 1995
SUPERSEDING
A-A-1799A
March 12, 1991
COMMERCIAL ITEM DESCRIPTION
BAG, PLASTIC (INTERLOCKING SEAL CLOSURE)
This Commercial Item Description has been approved by the General Services Administration/Federal Supply Service.
1. Scope. This description covers plastic bags with interlocking seal closures. Type 1 bags are intended to contain small items. Type 2 bags are intended to contain and protect delicate instruments and electronic components.
Bags shall be of the following types and sizes:
Type 1- Regular
Type 2- Cushioned
2. SALIENT CHARACTERISTICS:
2.1 Construction. Bags shall be flat style with a ziplock closure. Bags shall be provided with an interlocking seal closure extending the full width of the bag, located not less than 1.3 cm (1/2”) nor more than 1.9 cm (3/4”) from the top of the bag when measured to the middle of the seal. The interlocking seal shall close by applying pressure with the fingers to the seal area and shall open by pulling apart each side of the seal with the fingers.
|
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to: General Services Administration, Federal Supply Service, 26 Federal Plaza, New York N.Y. 10278 ATTN: Engineering Branch (2FYEE). |
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business