NOT MEASUREMENT
SENSITIVE
MIL-DTL-81997D
18 February 2004
SUPERSEDING
MIL-DTL-81997C
10 October 2002
DETAIL SPECIFICATION
POUCHES, CUSHIONED, FLEXIBLE,
ELECTROSTATIC-PROTECTIVE, TRANSPARENT
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification covers flexible, electrostatic-protective, transparent pouches
used in military preservation.
1.2 Classification. The types of pouches are as follows (see 6.2):
Type I
-
Double-walled electrostatic shielding reclosable pouches containing
permanently encapsulated cushioning
Type II
-
Single-walled static dissipative pouches with cushioned inner walls
1.3 Part or identifying number (PIN). Part numbers are used to identify pouches covered by
this specification. The part number will specify a given pouch in accordance with the following
established system:
Part Number: M81997-XYY
where X
= the type of pouch (see 1.2)
where type I = 1
type II = 2
YY = the pouch size designator (see table I)
Comments, suggestions, or questions on this document should be addressed to: Commander,
Naval Air Warfare Center Aircraft Division (Code 414100B120-3), Highway 547, Lakehurst,
NJ 08733-5100 or emailed to Tom.Omara@navy.mil. Since contact information can change,
you may want to verify the currency of this address information using the ASSIST Online
database at www.dodssp.daps.mil.
AMSC N/A
FSC 8105
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business