A-A-2714
B. Construction. All seams shall be sewn with stitch type 401, seam type EFa-1 of FED-STD-751, with 4 to 6 stitches per inch. Bottom and side seams shall have a stitching margin of not less than 1/4 inch from the edge of the bag. The top seam shall have a stitching margin of not less than 3/8 inch to allow for insertion of the drawstring. A twine drawstring shall be inserted through the hem at the top of the bag so that the each end of the drawstring projects not less than 2 inches from the bag. The total length of the drawstring shall be not less than twice the overall width of the bag plus an additional 6 inches. A tag, made from cloth lined paper stock and measuring 3 ± 1/16 inches by S-1/2 ± 1/16 inches, shall be inserted into the bottom of the bag and shall be sewn in place. When the bag is turned with the seam edges inside, the tag shall extend not less than 5 inches from the bottom of the bag. The paper side of the tag shall have a hard surface suitable for pen and ink addressing.
C. Dimensions. Dimensions shall be outside dimensions expressed as overall width X overall height. The tolerance for each dimension shall be + 3/8 inches, or – 1/4 inches.
D. Workmanship. The bags shall be uniformly made, neatly trimmed, free from holes, stains, tears, or other defects which may impair their serviceability or appearance. The tags shall be firmly attached.
2. QUALITY ASSURANCE:
A. Responsibility for inspection. Unless otherwise specified in the contract, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise in the contract, the contractor may use his own or other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform inspections set forth in this specification where such inspections are deemed necessary to ensure supplies and services adhere to prescribed to prescribed requirements.
B. Sampling for Examination and Testing. Fabric, thread, twine, bags, and shipping containers shall be sampled in accordance with Mil-STD-105.
1) The lot size for fabric shall be expressed in units of rolls of fabric and the sample unit shall be a full width swatch not less than 2 yards long. The Inspection Level shall be S-1, the AQL shall be 2.5 percent defective.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business