A-A-160E
2.1.3 Marking. Unless otherwise specified, each shipping sack shall be marked with the following: “FROM” in characters not less than 4.8 mm (3/16”) high shall be printed in the upper left hand corner of the shipping sack. Immediately after “FROM”, three horizontal lines shall be printed. Each line shall be 114 mm + 3.2 mm (4-1/2” + 1/8”) long. Lines shall be spaced not less than 12.7 mm (1/2”) apart. Approximately centered on the front of the sack, in characters not less than 4.8 mm (3/16”) high, “TO” shall be printed. Immediately after “TO”, four horizontal lines, spaced not less than 12.7 mm (1/2”) apart shall be printed. The first three lines shall be in 114 mm + 3.2 mm (4-1/2” + 1/8”) long and the fourth line shall be 76.2 mm + 3.2 mm (3” + 1/8”) long with a 6.4 mm + 0.06 mm (1/4” + 1/16) gap beginning 50.8 mm + 0.06 mm (2” + 1/6”) from the left edge. A hyphen shall be printed in the gap. After the gap, the line shall continue an additional 19.1 mm + 0.06 mm (3/4”+ 1/16”). Finally, at the end of the fourth line, “(ZIP + 4)”, shall be printed in characters not less than 4.8 mm (3/16”) high. See below illustration reference.
2.1.4 Special marking. Unless otherwise specified, each sack shall be marked with the logo and statement listed below, or similar statement indicating a specific PCRM content. The text color, location and size of the statement shall be in accordance with normal commercial practice.
CUSHIONING MEDIUM – 100% PCM BY WEIGHT
KRAFT PAPER – 5% PCM BY WEIGHT MINIMUM
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business