MIL-DTL-81997D
ATTENTION
STATIC SENSITIVE DEVICES
HANDLE ONLY AT STATIC SAFE WORK STATIONS
The color and position of these precautionary markings are optional. A label or labels containing
the precautionary markings shall be secured to an outer face of the pouch using adhesive or any
method that provides a secure attachment.
3.6 Seam continuity. Heat sealed seams and the reclosable closure for type I pouches shall
be complete and unbroken around the perimeter of the pouch, as specified in 4.5.
3.7 Seam strength. Heat seals shall meet the requirements of MIL-STD-2073-1, Appendix
G (see 4.6).
3.8 Sealing recommendations (type II only). Each unit package containing type II pouches
shall include a sheet legibly marked with the following heat-sealing information:
a. Jaw type sealer (temperature, pressure, and dwell).
b. Band type sealer (temperature, pressure, and dwell).
c. Rotary type sealer (preheat, pressure, and speed).
3.9 Workmanship. Pouches shall be free from any foreign matter, tears, cuts, splits, slits,
creases, or other imperfections.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified
as follows:
a. First article inspection (see 4.2).
b. Conformance inspection (see 4.3).
4.2 First article inspection. First article inspection shall consist of all the tests and
examinations specified in this specification.
4.3 Conformance inspection. Conformance inspections shall consist of all the visual
examinations listed in 4.4, the seam continuity test, and heat-sealed seam test specified in 4.5 and
4.6, respectively.
5
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business