MIL-DTL-29597C(NAVY)
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-3010
-
Test Procedures for Packaging Material
(Copies of these documents are available on line at https://assist.daps.dla.mil/quicksearch/ or
www.dodssp.daps.mil or from the Standardization Document Order Desk, 700 Robbins Avenue,
Building 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document
to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQ-Z1.4
-
Procedures, Sampling and Tables for Inspection by
Attributes. (DoD adopted)
(Copies of this document are available from www.asq.org or the American Society for
Quality, 600 Plankinton Avenue, Milwaukee, WI 53203.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS INTERNATIONAL (ASTM)
ASTM-D882
-
Plastic Sheeting, Tensile Properties of Thin.
ASTM-D898
-
Adhesive Solids, Dried, Applied Weight per Unit Area of
ASTM-D3985
-
Oxygen Gas Transmission Rate Through Plastic Film
Sheeting Using a Kilometric Sensor, Standard Test Method
for.
ASTM-D5733
-
Tearing Strength of Non-woven Fabrics by the Trapezoid
Procedure
ASTM-F88
-
Seal Strength of Flexible Barrier Materials, Test Method for.
ASTM-F1249
-
Water-Vapor Transmission Rate through Plastic Film and
Sheeting Using a Modulated Infrared Sensor, Standard Test
Method for.
(Copies of these documents are available from www.atsm.org or ASTM International, 100
Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
2.4 Order of precedence. In the event of a conflict between the text of this document and
the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business