A-A-1247B
1. SALIENT CHARACTERISTICS:
A) Construction. The bags furnished under this description shall be fabricated from regenerated cellulose, coated on both sides with a heat sealable resin. The resin coated cellophane shall meet the requirements of the Federal Food, Drug and Cosmetic Act for use in direct contact with food. Bag seals shall pass the Heat Sealed Seam test specified below. Grade 1 bags shall have a water vapor transmission rate of not more than 15.5 g/m2/day @ 37o C and 90% relative humidity when tested as specified by ASTM E 96 or ASTM F 1249. Grade 2 bags shall have a water vapor transmission rate of not less than 155 g/m2/day @ 37oC and 90% relative humidity when tested as specified by ASTM E 96 or ASTM F 1249. Bags shall be furnished in the style specified.
B) Dimensions. Dimensions shall be outside dimensions of fully extended bags, expressed as overall height x face width for Style 1 bags, or as overall height x face width x gusset width for Style 2 bags. Sizes shall be as specified, + 3 mm (+ 1/8 inch).
C) Workmanship. The bags shall be uniformly made, free from pinholes, tears, cuts, creases, dirt, extraneous matter, wrinkles, or other defects which may impair their serviceability or appearance.
2. QUALITY ASSURANCE:
A) Responsibility for Inspection. Unless otherwise specified in the contract, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspection set forth in the Commercial Item Description where such inspections are deemed necessary to assure that supplies and services conform to prescribed requirements.
B) Sampling. Bags and shipping containers shall be sampled in accordance with MIL-STD-105, as indicated below, for the cited examinations and tests.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business