A-A-1247B
C) Examination of the bags for Construction and Workmanship. The lot size shall be expressed in units of bags. The sample unit shall be 1 bag. The Inspection level shall be S-2, the AQL shall be 4.0 percent defective.
D) Examination of the bags for Dimensions. The lot size shall be expressed in units of bags. The sample unit shall be 1 bag. The Inspection level shall be S-2, the AQL shall be 4.0 percent defective.
E) Testing of the bags. The lot size shall be expressed in unit of bags. The sample unit shall be 4 bags. The Inspection level shall be S-1, the AQL shall be 2.5 percent defective.
(1) Heat Sealed Seam Test. One bag from each sample unit shall be tested for seam strength in accordance with Method 2024 of FED-STD-101, except that 1 specimen shall be cut from the middle of the seam and tested using a test weight of 100 + 10 g. The seam shall not rupture or delaminate.
(2) Water Vapor Transmission Rate. Each sample unit shall be tested for water vapor transmission rate as specified by ASTM E 96 or ASTM F 1249 at 37oC and not 90% relative humidity. Three specimens per sample unit shall be tested.
E) Examination of Packaging, Packing, Marking, and Palletization. The lot size shall be expressed in units of issue for Packaging, Packing, and Marking; and in pallets for Palletization. The sample unit shall be 1 fully prepared shipping container of 1 fully prepared pallet, as applicable. The Inspection level shall be S-2, the AQL shall be 4.0 percent defective.
3. REGULATORY REQUIREMENTS:
The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable.
4. PACKAGING, PACKING, MARKING, AND PALLETIZATION:
Packaging, packing, marking, and palletization shall be as specified in the contract or order.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business