3.2. Dimensions. Unless otherwise specified,
dimensions shall be designated as minimum face width X minimum overall height.
Face width shall be defined s 50% of the circumference of the top edge of the
bag.
3.3 Color. Unless otherwise specified, the bags shall be the natural
color of the resin from which they are made.
3.4 Style. Unless otherwise specified, style shall be at the option of
the supplier. When the seal is less than the face width, the minimum overall
height of the bag shall be increased by 0.16 times the difference in length
between the face width and the seal length. This additional height is necessary
to compensate for the gathering at the seal that reduces the capacity of the
bag.
3.5 Load Capacity. Load capacity shall be as specified in the contract
or order and shall be tested as specified in Section 5.3.1. Unless otherwise
specified, paperback books and/or magazines weighing between 200 g (0.4 pound)
and 2,000 g (4 pounds) each shall constitute the test load for Type 1 bags.
Unless otherwise specified , the test load for Type 2 and Type 3 bags shall be
full metal food cans weighing between 450 g(1.0 pound) and 910 g (2.0 pounds)
each.
3.6 Seal Continuity. Seal continuity shall be tested as specified in
Section 5.3.2.
3.7 Workmanship. The bags shall be uniformly made, free from holes,
tears, extraneous matter, or other defects which may impair their
serviceability or appearance.
4. REGULATORY REQUIREMENTS. The contractor shall certify that the
product contains a minimum of 10 % Post Consumer Recovered Materials in
accordance with the 40 Code of Federal Regulation Part 246, Comprehensive
Guideline for Procurement of Products Containing Recovered Materials; Final
Rule. The Government reserves the right to require proof of such conformance
prior to first delivery and thereafter as may be otherwise provided for under
the provisions of the contract.
5. QUALITY ASSURANCE.
5.1 Contractor Certification. The contractor shall certify and maintain
substantiating evidence that the product offered meets the salient
characteristics of this commercial item description, and that the product
conforms to the producer’s own drawings, specification, standards, and quality
assurance practices. The Government reserves the right to require proof of such
conformance prior to first delivery and thereafter as may be otherwise provided
for under the provisions of the contract.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business