A-A-2299D
5.3.2 Seal Continuity Test. Bags shall be placed in a clean container with smooth sides while adding the water. A volume of water at 21O + 3O C (70O + 5 O F) weighing 50 + 1% of the load capacity specified in the contract shall be poured into the bag. (Water at 21 O C weighs 998 grams per liter.) The bags shall be grasped or clamped within 30 cm (12 inches) of the top, removed from the container and raised by hand or mechanical means until the bottom of the bag is not less than 30 cm (12 inches) from the floor. The bag shall be held in this position for 60 seconds. Any leakage constitutes failure of the test. If 1 or more of the 5 bags elected for this test fails, the lot shall be rejected.
6. PACKAGING, PACKING, AND MARKING: Packaging, packing, and marking shall be as specified in the contract or purchase order.
7. REFERENCED DOCUMENTS: The issues of the referenced documents in effect on the date of the solicitation for offers or request for proposals shall be used to determine conformance with the requirements of this Commercial Item Description.
7.1 Code of Federal Regulations (CFR):
Title 40, Code of Federal regulations, Protection of the Environment, Part 247. Copies may be purchased with a VISA, Master Card or prepaid check through: Government Printing Office, Washington DC; Phone 202-783-3238. When ordering ask for: Title 40, Parts 190-250; Stock number: 869-013-00-146-0.
7.2 National standards:
ASTM methods may be obtained from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.
8. NOTES.
8.1 Purchaser shall specify the following in the contract or purchase order:
(a) Type and size required;
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business
5.3.2 Seal Continuity Test. Bags shall be placed in a clean container with smooth sides while adding the water. A volume of water at 21O + 3O C (70O + 5 O F) weighing 50 + 1% of the load capacity specified in the contract shall be poured into the bag. (Water at 21 O C weighs 998 grams per liter.) The bags shall be grasped or clamped within 30 cm (12 inches) of the top, removed from the container and raised by hand or mechanical means until the bottom of the bag is not less than 30 cm (12 inches) from the floor. The bag shall be held in this position for 60 seconds. Any leakage constitutes failure of the test. If 1 or more of the 5 bags elected for this test fails, the lot shall be rejected.
6. PACKAGING, PACKING, AND MARKING: Packaging, packing, and marking shall be as specified in the contract or purchase order.
7. REFERENCED DOCUMENTS: The issues of the referenced documents in effect on the date of the solicitation for offers or request for proposals shall be used to determine conformance with the requirements of this Commercial Item Description.
7.1 Code of Federal Regulations (CFR):
Title 40, Code of Federal regulations, Protection of the Environment, Part 247. Copies may be purchased with a VISA, Master Card or prepaid check through: Government Printing Office, Washington DC; Phone 202-783-3238. When ordering ask for: Title 40, Parts 190-250; Stock number: 869-013-00-146-0.
7.2 National standards:
ASTM methods may be obtained from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.
8. NOTES.
8.1 Purchaser shall specify the following in the contract or purchase order:
(a) Type and size required;
(b) Weight to be used in the Load Capacity Test;
(c) Packaging required;
(d) Color (when a special color is required);
(e) Style (when a special style is required);
(f) Test Load (when a test load other than that specified in Section 3.5 is required).
(g) When the Staircase Testing Technique is to be used to
test Impact Resistance.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business