INCH-POUND
MIL-DTL-22020E
23 December 2009
SUPERSEDING
MIL-B-22020D
2 May 1990
DETAIL SPECIFICATION
BAGS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE
CORROSION INHIBITOR TREATED
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This document covers volatile corrosion inhibitor (VCI) treated flexible
transparent bags used in military preservation.
1.2 Classification. The treated bags are furnished in the following classes, as specified (see
6.1):
Type I
-
Heat sealable
Type II
-
Cold (pressure) sealable
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements documents cited in sections 3 and 4 of this specification, whether
or not they are listed.
Comments, suggestions, or questions on this document should be addressed to: Commander,
Naval Air Warfare Center Aircraft Division, Code 4L8000B120-3, Highway 547, Lakehurst, NJ
08733-5100 or emailed to michael.sikora@navy.mil . Since contact information can change,
you may want to verify the currency of this address information using the ASSIST Online
database at https://assist.daps.dla.mil.
AMSC N/A
FSC 8105
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business