MIL-DTL-22020E
2.2 Government documents.
2.2.1 Specifications and standards. The following specification and standard form a part of
this document to the extent specified herein. Unless otherwise specified, the issues of these
documents are those cited in the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-PRF-22019 -
Barrier Materials, Transparent, Flexible, Sealable, Volatile
Corrosion Inhibitor Treated.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-3010
-
Test Procedures for Packaging Materials.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch/ or
https://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins
Avenue, Bldg 4D, Philadelphia, PA 19111-5094.)
2.3 Non-Government publications. The following documents form a part of this document
to the extent specified herein. Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQ-Z1.4
-
Sampling Procedures and Tables for Inspection by
Attributes (DoD adopted)
(Copies of this document are available from https://www.asq.org the American Society for
H
Quality, 600 Plankinton Avenue, Milwaukee, WI 53203.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), samples shall be subjected to first article
inspection in accordance with 4.2.
3.2 Material. The bags shall be fabricated from material qualified under MIL-PRF-22019
and listed in QPL-22019, as follows:
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business