MIL-DTL-22020E
from the managing Military Department's or Defense Agency's automated packaging files, CD-
ROM products, or by contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but
is not mandatory.).
6.1 Intended use. Bags covered by this specification are intended for use in specialized
military methods of preservation where VCI treated sealable bags are required. Barrier materials
used in the construction of these bags are military unique and the bags provide the necessary
protection to their contents from exposure to the extremes of the navy/naval aviation
environment. There are no commercial equivalent materials that can provide this protection.
Bags meeting the requirements of this specification are one of the building blocks approved
under MIL-STD-2073-1 to provide the unique protective properties required to protect military
hardware from exposure to the severe military operating environment.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of this specification.
b. Type of bag (see 1.2).
c. Size of bags (inside length and width dimensions) (see 3.4).
d. If first article inspection is required (see 4.2).
e. Packaging requirements.
6.3 Lot size. Inspection lot will consist of all bags manufactured by the same process from
the same raw material during one production run.
6.4 Material Safety Data Sheets (MSDSs). Contracting officers will identify those activities
requiring copies of completed Material Safety Data Sheets prepared in accordance with FED-
STD-313. The pertinent Government mailing addresses for submission of data are listed in
FED-STD-313; and 29 CFR 1910.1200 requires that the Material Safety Data Sheet for each
hazardous chemical used in an operation must be readily available to personnel using the
material. Contracting officers will identify the activities requiring copies of the Material Safety
Data Sheet.
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business